GT35 GT3582 Turbo Charger 600+HP T3 AR. 70/63 Anti-Surge Compressor Turbocharger

Exhaust Inlet Flange: T3 Flange. Turbine Exducer Diameter: 62.4mm. Compressor Inducer Diameter: 61.5mm.

Compressor Exducer Diameter: 81.5mm. Compress Inlet Size(Air intake): 4 inch (103.5mm). Compressor Outlet Size: 2.5 inch (63.6mm).

Cooling Type: Water + Oil Cooling. Horse Power: Up to 600HP. Oil Outlet: M14.1 & 2M81.25. Accessories: You will get exactly as shown as picture above.

Pakage Size: 26 x 25 x 23 cm. Turbine housing : iron QT450-10 shell. Steel Turbine Wheel: K418 alloy. 2 x Oil feed/drain gaskets.

Turbine housing: Ductile iron QT450-10 - temperature resistant up to 700? Steel turbine wheel: K418 alloy - high oxidation stability and resistance up to 900?

Compressor housing: ZL104 aluminum with lightweight. Compressor wheel/blades: Cast aluminium blades - superior air tightness & corrosion resistance. Cost-effective turbo increase 20-40% power for your car. Rich experience in turbo production and own factory.

High-Speed oil seal ring and Precision clearance. Built for durability and strength. 100% balancing Test by TURBOTECHNICS VSR3.

Make sure the oil drain line is lower than the turbo itself. Gasoline car must install a water cooling device to avoid overheating.

Ensure exhaust outlet are well sealed by welding. The degree of modification of the universal turbo depends on your individual vehicle. Professional installation is highly recommended. This Turbo is not vehicle specific. Please check the specifications and verify compatibility prior to placing your order.

Before installing the new turbocharger, the cause that led to the failure of the turbo must be analyzed and eliminated e. Insufficient oil supply, foreign bodies in the intake area, crankcase ventilation without function, etc. Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage.

Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately.

Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil. Don't give us your P O box address which we can't send by express.

We adopt the same quality control equipment as original manufacturing to make high-precision turbocharger and it' s parts. In order to consistently produce high-quality products, we control our quality strictly by various balance machines that was imported from Germany, measuring machines and inspection devices. Consequently, we help customers to save time and guarantee the high performance and durability of turbochargers.